2K-H 行星传动的极限传动比

在行星轮系机构综合中,研究行星轮数目与极限传动比的关系有着极其重要的意义。本文根据２Ｋ─Ｈ行星轮系机构的同心条件、安装条件和邻接条件,采用统一的符号,对满足上述条件的所有（六种）２Ｋ─Ｈ行星轮系机构,导出了行星轮个数与极限传动比的统一关系式,得到了所有２Ｋ─Ｈ行星轮系机构的极限传动比计算公式,为２Ｋ─Ｈ行星轮系机构的综合提供了理论根据。     

基于VFGPIR联合特征的决策级加权融合检测方法

车载前视地表成像雷达(VFGPIR)探测浅埋目标时面临虚警率过高问题,可利用序列图像特征的联合检测解决这一问题.首先利用Fisher鉴别比(FDR)定量评估从单帧和序列图像中提取的单个特征的鉴别能力;然后针对单个最优序列特征无法满足探测指标要求提出一种基于决策级加权融合的多特征联合检测方法;最后利用接收机工作特性(ROC)曲线来验证所提方法的有效性.试验结果表明:序列特征比单帧图像特征具有更好的鉴别能力;所提方法性能优于单个最优序列特征、特征向量和多数票融合准则对应的检测结果,有望满足实际探雷应用需求.     

二层粘弹阻尼复合结构的优化设计

构造二节点八自由度有限元模型对二层粘弹弱约束阻尼复合结构的动力学特性进行了数值分析,其计算结果与实验结果基本一致.利用此有限元模型研究了各层阻尼材料的几何及物理参数对复合结构阻尼性能的影响.     

高空平台通信系统中多波束天线辐射特性对系统性能的影响

高空平台通信系统中将采用多波束天线提供蜂窝覆盖，来提高系统容量。本文分析等波束宽度和等波束面积两种类型多波束天线辐射特性以及它们的几何模型，推导了载干比计算公式，通过仿真分析不同参数配置条件下多波束天线辐射特性对系统载干比性能的影响。研究表明等波束面积多波束天线比等波束宽度多波束天线具有更好的载干比分布特性。本文得出的结论对HAP通信系统规划具有重要的指导意义。     

基于辐照度标准传递的辐亮度校准系统

介绍了一种新型辐亮度校准系统,通过溯源至国家辐照度标准,构建了军用光辐射校准平台。对系统的测量不确定度分析表明,该系统可以满足装备计量保障对测试不确定度比的通用要求,适用于装备专用检测设备的辐亮度校准。     

变极性等离子弧焊换向过程控制方法研究

通过试验证实了变极性等离子弧焊换向过程中存在电弧电流谐振现象,且不同极性的电流谐振峰值不同,依据电弧理论分析发现换向期间等效电弧电阻是一个时变量。对换向电路建模分析和仿真结果表明,在换向期间系统阻尼比为时变量,调整系统阻尼比是降低电流谐振峰值的有效途径。又根据变结构控制思想提出了新的换向控制方法,并重新设计了换向电路,显著降低了电流谐振峰值,改善了大电流焊接时换向器件的工作状态,为大功率变极性等离子弧焊电源的研制和开发提供了依据。     

On the application and extension of system signatures in engineering reliability

Following a review of the basic ideas in structural reliability, including signature‐based representation and preservation theorems for systems whose components have independent and identically distributed (i.i.d.) lifetimes, extensions that apply to the comparison of coherent systems of different sizes, and stochastic mixtures of them, are obtained. It is then shown that these results may be extended to vectors of exchangeable random lifetimes. In particular, for arbitrary systems of sizes m < n with exchangeable component lifetimes, it is shown that the distribution of an m‐component system's lifetime can be written as a mixture of the distributions of k‐out‐of‐n systems. When the system has n components, the vector of coefficients in this mixture representation is precisely the signature of the system defined in Samaniego, IEEE Trans Reliabil R–34 (1985) 69–72. These mixture representations are then used to obtain new stochastic ordering properties for coherent or mixed systems of different sizes. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

某型多管火箭炮射击间隔优化研究

为提高某型多管火箭炮火力密度,对其射击间隔进行优化研究。首先,建立某型多管火箭炮刚柔耦合模型,获得定向器管口动态响应,计算火箭弹起始扰动;然后,求解火箭炮外弹道方程,采用数理统计方法得到多管火箭炮密集度估计值;其次,基于Lanczos法对多管火箭炮进行模态分析,结合火箭炮管口动态响应确定新的射击间隔;最后,将新射击间隔输入动力学模型计算,结果表明在不影响射击密集度的基础上,新的射击间隔缩短发射时间21.4%,有效地提高了多管火箭炮火力密度。     

Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions.     

利用复单脉冲比的平面阵列雷达群目标检测方法

针对平面阵列雷达群目标检测问题,以矩形阵为例,详细分析方位向和俯仰向复单脉冲比虚部的统计特性;建立平面阵列雷达群目标检测模型,根据恒虚警检测原理推导复单脉冲比虚部的椭圆判决域,并利用复单脉冲比实部辅助判决,综合提出基于复单脉冲比的平面阵列雷达群目标检测算法。针对双目标情形进行仿真实验,结果表明:在较高信噪比、较大角度间隔以及幅度相当且相位差较大的条件下算法能够有效检测群目标。